You rely on your washing machine every week, and you expect it to clean your clothes thoroughly so that you can dry them and wear them again. However, if you open the washer only to find sopping wet clothes, or that the machine never finished its wash cycle, you could be left with wet, soapy clothes that you now have to wash by hand. At Wettstein’s, we can come to your home and repair your washing machine so that you can look forward to clean clothes once again. When you need appliance repair in La Crosse, you can count on us!

Common Washer Problems

There are quite a few things that can go wrong with your washing machine, and depending on its age, there might be multiple reasons behind it not turning on, finishing its cycle, or thoroughly rinsing your clothes. Here are a few of the more common washer problems:

1. Washer Won’t Spin

We all know that the washer is supposed to spin while it cleans your clothes, but if yours won’t spin or the agitator seems to be stuck, then there could be a few reasons why:

  • Lid Switch Assembly – This part prevents the washer from spinning when the lip is up or open, and if the assembly doesn’t latch or lock properly, the machine won’t spin. The machine needs the signal from the lid switch assembly, otherwise it will just sit there with your clothes in it.
  • Drive Belt – This part is what causes the basin to spin and move once the machine is turned on. If the belt is loose or broken, there’s nothing to spin the basin, which means your clothes won’t get clean.
  • Motor Coupling – This connects the machine’s motor to its transmission. An overloaded washer can cause the coupling to fail, which it does in order to protect the motor and transmission from damage. It can also break down due to normal wear and tear.

2. Washer is Leaking Water

One of the worst things you can discover in your laundry room is that the washing machine has leaked water all over the floor. Not only are your clothes not clean, but there may be damage done to your home. If you’re washer is leaking water, these reasons could be why:

  • Drain Pump – This pump is meant to pump water out through the drain hose. If it’s damaged or disconnected, it could leak water onto the floor. When this happens, it’s best to replace the pump right away.
  • Tub Seal – The tub seal is what keeps the water in the wash tub or basin, and if it’s cracked, water could find its way into the tub bearings and out onto the floor. In order to replace a damaged tub seal, the machine will likely need to be disassembled, which should be handled by a repair professional.

3. Washer Won’t Drain

If you’ve ever opened your washer to find it still full of water, then you know how frustrating it can be when the machine doesn’t drain properly. When that happens, you can often narrow down the problem to these causes:

  • Clogged Hose – If the drain hose gets clogged with clothing or debris from your pockets, then it can be difficult for the machine to drain properly. Removing these hoses and checking for blockages is the only way to be sure something isn’t clogging the drain.
  • Lid Switch Assembly – Much like it does when the washer won’t spin, the lid switch assembly can cause the washer not to drain as well. If the assembly fails mid-cycle due to the movement and vibration of the machine, then the machine will shut off and the water won’t drain as it should.

These are just three of the common problems that a washing machine can experience. As you can see, there can be a number of parts that can contribute to these problems, and if any of them break or fail, you could be left with wet, soapy clothes or a flooded laundry room. When that happens, contact Wettstein’s in La Crosse right away for expert appliance repair. We’re dedicated to providing the very best service every time you call.

We look forward to helping you!

  • Do not fill this form out if you're a solicitor.
  • This field is for validation purposes and should be left unchanged.